Sony DCR-IP5E/IP7E Operating Instructions Manual page 53

Playing back a tape
To return to the FN screen
Select EXIT, then press the centre z on the
z
control button.
To stop playback
Select , then press the centre z on the control z
button.
When monitoring on the LCD screen
You can turn the LCD panel over and move it
back to the camcorder body with the LCD screen
facing out.
If you leave the power on for a long time
Your camcorder gets warm. However, this is not
a malfunction.
When you open or close the LCD panel
Before you open or close the LCD panel return it
to the position illustrated below.
Note
Be careful not to touch the VBATT lever while V
you are playing back a tape. The battery pack
may accidentally detached from the camcorder.
53