Table of Contents
Advertisement
Maintenance information and
precautions
Removing dust from inside the
viewfinder
(1) Pull out the viewfinder in the direction of the
arrow 1. Remove the two screws in the
direction of the arrow 2 with a screwdriver
(optional). Remove the eyecup in the direction
of the arrow while pressing the projection 3.
(2) Remove dust from inside the eyecup and
viewfinder with a commercially available
blower.
(3) In reverse, starting from 3, attach the eyecup.
Then replace the screws in the direction of the
arrow 2.
Caution
Do not remove any other screws. You may
remove only the screws necessary to remove the
eyecup.
Notes
•Do not drop or bend the eyecup shaft.
•Be careful when handling the eyecup.
(1)
1
3
2
2
(2)
(3)
1
2
3
3
2
239
Hide quick links:
Advertisement
Table of Contents
