Sony DCR-IP5E/IP7E Operating Instructions Manual page 102

Dubbing a tape
(1) Insert a blank tape (or a tape you want to
record over) into the recorder, and insert a
recorded tape into your camcorder.
(2)Prepare the recorder for recording.
Set the input selector to LINE if it is provided.
Refer to the operating instructions of the
recorder.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the recorder.
: Signal flow/
When you have finished dubbing the
tape
Stop the recording on the recorder, and stop the
playback on the camcorder.
You can connect only one recorder using the
i.LINK cable
See page 233 for more information about i.LINK.
The following functions do not work during
digital editing:
– Picture effect
– Digital effect
Note on playback pause pictures
When you dub a playback pause picture:
•The recorded picture becomes rough when
recorded through the i.LINK (MICROMV) jack.
•The picture may jitter when you play back the
tape on other video devices.
•There may be a time-lag when you play back
the tape on other video devices.
102
(supplied)/
i.LINK
(MICROMV)
(1)
(2)
(3)
(4)
(5)
i.LINK
(MICROMV)