Sony DCR-IP5E/IP7E Operating Instructions Manual page 54

Playing back a tape
To display the screen indicators
– Display function
Press DISPLAY on your camcorder or on the
Remote Commander. The indicators being
displayed disappear from the screen. To display
the indicators, press DISPLAY again.
Using the data code function
Your camcorder automatically records not only
images on the tape but also the recording data
(date/time and various settings when recorded)
(Data code).
Follow the steps below to display the data code
using the camcorder or the Remote Commander.
When using the camcorder
To display the data code
(1) In playback or playback pause mode, select
FN, then press the centre z on the control
button. The PAGE1 screen appears.
(2) Select PAGE3, then press the centre z on the
control button. The PAGE3 screen appears.
(3) Select DATA CODE, then press the centre z
on the control button. The DATA CODE
screen appears.
54
(1)
(2)
z
(3)
DATACODE
OFF OK
CAM DATE
DATA DATA
DISPLAY
z
z