Sony DCR-IP5E/IP7E Operating Instructions Manual page 130

Changing the menu settings
Icon/item
DATA CODE*
AREA SET
SUMMERTIME
BEEP
COMMANDER
DISPLAY
REC LAMP
* Using the Remote Commander only
Note
If you press DISPLAY with "DISPLAY" set to "V-OUT/LCD" in the menu settings, the picture from
the TV or VCR will not appear on the screen even when your camcorder is connected to outputs on the
TV or VCR.
Even if the power source is detached from the camcorder
The menu items settings will be retained even if you remove the power source.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is too close. In this case, we recommend you set REC LAMP to OFF.
130
Meaning
Mode
To display date, time and various settings during
z DATE/CAM
playback.
To display date and time during playback.
DATE
To set your area temporarily, when using the
——
camcorder in a new location (p. 34).
To be used when your area is not in daylight saving
z OFF
time.
To be used when your area is in daylight saving
ON
time.
To output a melody when you start/stop recording
z MELODY
or when an unusual condition occurs on your
camcorder.
To output a beep instead of the melody.
NORMAL
To cancel both the melody and beep sound.
OFF
To activate the Remote Commander supplied with
z ON
your camcorder.
To deactivate the Remote Commander to avoid
OFF
remote control misoperation caused by remote
control of other VCRs.
To show the indicators on the LCD screen and
z LCD
viewfinder.
To show the indicators on the TV screen, LCD screen
V-OUT/LCD
and viewfinder.
To light up the camera recording lamp at the front of
z ON
your camcorder.
To turn the camera recording lamp off so that the
OFF
subject is not aware of your recording.
POWER
switch
MEMORY
VCR
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY