Sony DCR-IP5E/IP7E Operating Instructions Manual page 72

Using special effects – Digital
effect
(1) In CAMERA mode, select FN, then press the
centre z on the control button. The PAGE1
screen appears.
(2) Select PAGE3, then press the centre z on the
control button. The PAGE3 screen appears.
(3) Select DIG EFFT, then press the centre z on
the control button. The DIG EFFT screen used
for selecting the desired digital effect mode
appears.
(4) Select the desired digital effect mode, then
press the centre z on the control button. In
STILL and LUMI. modes, the still image is
stored in memory.
(5) Select –/+, then press the centre z on the
control button repeatedly to adjust the effect.
You can also adjust the effect by pressing b/
B repeatedly after you select –/+.
Items to be adjusted
STILL
FLASH
LUMI.
TRAIL
SLOW SHTR Shutter speed. The larger the
OLD MOVIE No adjustment necessary
(6) Press DISPLAY to turn off the screen buttons.
72
The rate of the still image you want
to superimpose on the moving
picture
The interval of flash motion
The colour scheme of the area in
the still image which is to be
swapped with a moving picture
The vanishing time of the
incidental image
shutter speed number, the slower
the shutter speed.
(1)
(2)
z
(3)
z
(4)
(5)
(6)
z
z
z
b B