Sony DCR-IP5E/IP7E Operating Instructions Manual page 100

Dubbing a tape
(1) Insert a blank tape (or a tape you want to
record over) into the VCR, and insert a
recorded tape into your camcorder.
(2) Prepare the VCR for recording: connect the
A/V connecting cable, then set the input
selector to LINE.
Refer to the operating instructions of the VCR.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your
VCR.
A/V
When you have finished dubbing the
tape
Stop the recording on the VCR, and stop the
playback on the camcorder.
You can edit on VCRs that support the
following systems
8 mm, Hi8,
S-VHS, VHSC,
Betamax,
DV, or
100
: Signal flow/
Digital8, VHS,
S-VHSC,
ED Betamax,
MICROMV
(1)
(2)
(3)
(4)
(5)
S VIDEO or VIDEO/
mini DV,
IN
S VIDEO
VIDEO
AUDIO
AUDIO