Using a "Memory Stick"
– introduction
While the access lamp is lit or flashing
Do not shake or strike your camcorder because
your camcorder is reading the data from the
"Memory Stick" or recording data on the
"Memory Stick". Do not turn the power off, eject
the "Memory Stick" or remove the battery pack.
Otherwise, the image data may be corrupted.
If "
MEMORYSTICK ERROR" is displayed
Remove the "Memory Stick", then insert it again.
If the message is still displayed, the "Memory
Stick" may be corrupted. Use another "Memory
Stick".
Using a button displayed on the
screen
Your camcorder has operation buttons on the
screen. Use the control button to operate the
buttons on the screen.
140