Sony DCR-IP5E/IP7E Operating Instructions Manual page 203

Viewing images recorded on a
"Memory Stick" using your
computer
For Windows 98, Windows 98SE,
Windows Me, Windows 2000
Professional users
(1) Turn on the power of your computer and
allow Windows to load.
(2) Insert the supplied CD-ROM in the CD-ROM
drive of your computer. The application
software screen appears.
(3) Set the cursor on "USB Driver Installation for
Windows 98/98SE/Me and Windows 2000"
and click. USB driver installation starts.
(4) Follow the on-screen messages to install the
USB driver.
(5) Connect the USB jack on your camcorder to
the USB connector on your computer using
the supplied USB cable.
(6) Insert a "Memory Stick" into your camcorder,
connect the AC power adaptor and set the
POWER switch to MEMORY.
USB MODE appears on the screen of your
camcorder. Your computer recognizes the
camcorder, and the Windows Add Hardware
Wizard starts.
(7) Follow the on-screen messages to have the
Add Hard Ware Wizard recognize the
hardware. The Add Hardware Wizard starts
twice because 2 different USB drivers are
installed. Be sure to allow the installation to
complete without interrupting it.
Computer/
(1)
(2)
(3)
(4)
(5)
(6)
(7)
USB connector/
USB cable/
USB
Push into the end/
203