Sony DCR-IP5E/IP7E Operating Instructions Manual page 168

Superimposing a still image in a
"Memory Stick" on a moving
picture – MEMORY MIX
(1) Set the POWER switch to CAMERA.
(2) In standby mode, select FN, then press the
centre z on the control button. The PAGE1
screen appears.
(3) Select MEM MIX, then press the centre z on
the control button. The last recorded or last
composed image appears on the lower part of
the screen as a thumbnail image.
(4) Select –/+ on the lower-right corner of the
screen, then press the centre z on the control
button to select the still image which you
want to superimpose.
– : to see the previous image
+: to see the next image
(5) Select the desired mode, then press the centre
z on the control button. The still image is
superimposed on the moving picture.
(6) Select –/+ on the lower-left corner of the
screen, then press the centre z on the control
button to adjust the effect.
(7) Select OK, then press the centre z on the
control button. The PAGE1 screen appears.
(8) Select EXIT, then press the centre z on the
control button. The FN screen appears.
(9) Press START/STOP to start recording.
2
FN
168
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
9
1
CAMERA
MEMORY/
NETWORK
VCR
3
MEM
M I X
4,5
–
6
–
z
z
z
z
POWER
(CHG)
OFF
ON
MODE
MEM MIX
OFF MCCAM OVER– OK
LUMI LAP
CAMCM MCCAM
CHROM CHROM
100–0001
– +
MEM MIX
OFF OK
+
M. LUMI
100–0001
– + – +
MEM MIX
OFF OK
+
M. LUMI
100–0001
– + – +
z
z
z
Still image/