Table of Contents
Advertisement
DryView 8600 User Guide
Message
INPUT A (B) PROGRAM MEMORY FULL
PRESS ENTER TO CONTINUE
INPUT A (B) SYNC FAILURE (39)
INPUT A (B) UNDERFLOW FAILURE (62)
INSERT FILM TRAY (12)
INSUFFICIENT MEMORY FOR IMAGE FILE A
(B) (81) PRESS ENTER TO CONTINUE
INSUFFICIENT MEMORY FOR PRINTSET A (B)
(82) PRESS ENTER TO CONTINUE
INVALID DATA RECEIVED FROM INPUT A (B)
(53) - PRESS ENTER TO CONTINUE
LAMP FAILED TO REACH TEMPERATURE (71)
PRESS ENTER TO LOAD DEFAULT GAMMA
TABLES
LASER BOARD FAILURE (46)
CALL SERVICE – PRESS ENTER TO
CONTINUE
LOADING DEFAULT GAMMA TABLES
LOCAL PANEL BUFFER OVERFLOW (85)
CALL SERVICE – PRESS ENTER TO
CONTINUE
LOCAL PANEL RAM FAILURE (73)
CALL SERVICE – PRESS ENTER TO
CONTINUE.
MAXIMUM DENSITY LESS THAN 3.5
NO IMAGE ACQUIRED ON INPUT A (B) (68)
PRESS ENTER TO CONTINUE
NON-VOLATILE CLOCK RAM FAILURE (96)
CALL SERVICE – PRESS ENTER TO
CONTINUE
5-4
Operator Action
Press Enter to continue.
Power imager off, wait 10-20 seconds,
then power back on. If message
reappears, call for service.
Try acquiring an image again. If problem
persists, call for service.
Insert the film tray.
Press Enter to continue. As films are
printed, memory will become available.
Press Enter to continue. As films are
printed, memory will become available.
Call for service.
Call for service.
Power imager off, wait 10-20 seconds,
then power back on. If message
reappears, call for service.
Automatic operation. Verify image
quality.
Power imager off, wait 10-20 seconds,
then power back on. If message
reappears, call for service.
Power imager off, wait 10-20 seconds,
then power back on. If message
reappears, call for service.
No action required.
Reacquire an image.
Power imager off, wait 10-20 seconds,
then power back on. If message
reappears, call for service.
8186546
2000 March Rev. B
Advertisement
Table of Contents
