Table of Contents
Advertisement
Parameter Menu
Print Contrast Samples
Sharp/Smooth
1999 June Rev. A
8186546
Prints contrast samples (uses the last acquired image
for the sample and current density).
To print samples, press Enter.
During printing, print progress is indicated. If no fault
appears during printing, returns to the Print Contrast
Samples menu. To stop printing, press Exit.
(In a DICOM network, this parameter can be changed
only at the modality or in the PACS Link 9410
Acquisition System.)
Determines the sharpness or smoothness of the
printed image. Smooths out the jagged edges of the
pixels in an image as specified.
Selections:
Range: 1 to 6 or Auto
1 = Sharpest image
6 = Smoothest image
Auto = The imager determines the
best setting for the size of the image.
Current setting is marked by an asterisk (*).
(In a DICOM network, this parameter can be changed
only at the modality or in the PACS Link 9410
Acquisition System.)
Section 2 – Controls and Indicators
Description
2-13
Advertisement
Table of Contents
