Table of Contents
Advertisement
DryView 8600 User Guide
Parameter Menu
Contrast
Date/Time
Density
Detector Size
Exposure Index
Film Layout
2-10
Controls the amount of contrast in an image. Contrast
is the difference between the lighter and darker areas
of an image.
Range: 1 to 12
Use the contrast samples to choose the best value
and enter the number for that value.
(In a DICOM network, this parameter can be changed
only at the modality or in the PACS Link 9410
Acquisition System.)
Changes date and time.
Press Enter to access each part of the date in turn or
the time.
A blinking cursor identifies the current value for each
part of the date or time.
Either use the numeric keypad to enter a new value,
or use the arrow buttons to change the value
displayed (such as the month or the year).
Controls the density of the image.
(In a DICOM network, this parameter can be changed
only at the modality or in the PACS Link 9410
Acquisition System.)
Specifies the size of the pixels in the image to be
printed. This parameter is unused when Image Size
is Scale to Fit.
Note: This parameter is not user-adjustable.
This setting is for service only. Do not change.
Allows you to select Format and Mode. (See those
entries in this table.)
(This parameter applies only to the optional keypad.)
Description
8186546
1999 June Rev. A
Advertisement
Table of Contents
