Table of Contents
Advertisement
DryView 8600 User Guide
Parameter Menu
Mode
Number of Copies
Perform Calibration
Polarity
2-12
Allows setting printing mode to Landscape or Portrait.
Changes the number of copies printed.
Range: 1 to 99
(This parameter applies only to the optional keypad.)
Prints a calibration step wedge using current settings,
then calibrates the densitometer.
Press Enter to start the calibration.
If a problem occurs during calibration, the imager
displays an error message. Refer to Troubleshooting,
Table 5-1, for information on how to deal with the
problem.
Determines whether image is printed as a positive or
negative.
Selections:
POSITIVE
If the acquired image is positive, prints a
positive image and vice versa.
NEGATIVE
Reverses the acquired print (a positive
acquired image is printed as a negative and
vice versa).
Description
8186546
1999 June Rev. A
Advertisement
Table of Contents
