Table of Contents
Advertisement
Parameter Menu
Format
Gamma Table
Image Size
Keypad Format
1999 June Rev. A
8186546
Determines the number of images that print on a
single sheet of film.
Specifies which of two sets of gamma tables will be
used to control image brightness and density: (1)
transmittance or (2) linear optical density.
The DryView 8600 creates the two sets of 16 gamma
tables each time it self-calibrates. The gamma tables
are used by the DryView 8600 in conjunction with
the current contrast setting to provide grayscale
optimization.
Note: This parameter is not user adjustable. The
appropriate set of gamma tables is selected by the
Field Engineer with the user's input at installation.
Defines the size of the printed image.
Scale to Fit: Image will be magnified or
reduced to fit the image area on the film,
unless the parameter is overridden by the
modality.
Note: This parameter is not user adjustable.
Determines the default number that displays on the
Format Selected indicator. The Format parameter
controls the number of images that print on a single
sheet of film.
Range: 1, 2, 4, and 6
If you change this value at the keypad, the new value
is not retained when you switch off the imager. When
the imager is switched on again, the default value
present before the manual change will be
re-displayed.
(This parameter applies only to the optional keypad.)
Section 2 – Controls and Indicators
Description
2-11
Advertisement
Table of Contents
