Table of Contents
Advertisement
If the DryView 8600 Laser Imager is being used in a DICOM network, the Density,
Contrast, Print Contrast Samples, Sharp/Smooth, Gamma Table, Image Size, and
Detector Size parameters can be changed only at the modality or in the PACS Link
9410 Acquisition System. Changes in the PACS Link 9410 Acquisition System are to
be performed only by a Kodak service representative.
The general setup menus are accessed in the order shown below. Individual menu
descriptions are listed alphabetically in Table 2-1.
General Setup Menus
1.
Format
See page 2-11
2.
Mode
See page 2-12
* If the system is in a DICOM network, this parameter can be changed only at the
modality or in the PACS Link 9410 Acquisition System.
** Applicable to the optional Remote Keypad only.
1999 June Rev. A
8186546
1.
Density *
See page 2-10
2.
Contrast *
See page 2-10
Print Contrast
3.
Samples *
See page 2-13
4.
Sharp/Smooth *
See page 2-13
5.
Polarity
See page 2-12
Number of
6.
Copies **
See page 2-12
7.
Autoprint **
See page 2-9
8.
Film Layout **
See page 2-10
Section 2 – Controls and Indicators
9.
Keypad Format **
10.
Audible Alerts **
11.
Exposure Index
Perform
12.
Calibration
13.
Date/Time
14.
Gamma Table *
15.
Image Size *
16.
Detector Size *
See page 2-11
See page 2-9
See page 2-10
See page 2-12
See page 2-10
See page 2-11
See page 2-11
See page 2-10
2-5
Advertisement
Table of Contents
