System Components - Agilent Technologies 1290 Infinity LC System System Manual And Quick Reference

System Components

The Agilent 1290 Infinity Binary Pump
The Agilent 1290 Infinity Binary Pump contains new technology to overcome
the problems of pumping LC solvents at ultra-high pressure and high flow
rates: heavy duty drive motors on the pistons; new material for the pistons
themselves not only to withstand the workload but also to actively transfer
heat from the seals; microfluidic heat exchangers and the Jet Weaver, a
microfluidic mixing device. The pump can deliver flow in the range of 0.05 –
5 mL/min at pressures up to 1200 bar.
The Agilent 1290 Infinity Binary Pump module contains two identical high
pressure (1200 bar) pumps; a two-channel solvent degasser and four-channel
inlet solvent selection valve, automatic purge valve and low-volume mixing
device, the Jet Weaver, integrated into a single housing. The degasser increases
flow stability, especially at low flow rates, and detector sensitivity.
Figure 11
Agilent 1290 Infinity LC System Manual and Quick Reference
The Agilent 1290 Infinity LC System - Product Description
The Agilent 1290 Infinity Binary Pump
System Components
2
25