[Esc+Rg] Multiple Language - SATO CL4NX Programming Reference Manual

[ESC+RG] Multiple language

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Printing multiple language fonts.
[Format]
<RG>a,b,c,ddd,eee,ffff...fff
Parameter
a : [Character code]
Character code of print data to be specified to a parameter f.
Refer to the table below.
b : [Font set] Font type for printing. Refer to the table below.
c : [Modification]
0: Standard
1: Italic
2: BOLD
3: BOLD+Italic
d : [Width]
Valid range: 20 to 999 (dots)
Valid range: P09 to P99 (points)
e : [Height]
Valid range: 20 to 999 (dots)
Valid range: P09 to P99 (points)
*One point is 0.35 mm.
f : [Print data] (character code)
[Character code list]
Parameter a
0
1
2
3
4
5
-
ESC
<1B>
16
Nil
When the power is OFF
Valid range within items
Valid range between items
UNICODE (UTF-8)
UNICODE (UTF-16BE) *Recommended
S-JIS
BIG5
GB18030
KSX 1001 (EUC-KR)
Character set specified by <CE>.
* If UTF-8 or X201 has been selected by <CE>, it is the value of the following.
<CE>: UTF-8、<RG>Parameter a: 0:UTF-8
114
RG
<52> <47>
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Character code
Parameter
a,b,c,ddd,eee,ffff...fff