[Esc+B] Barcode (Ratio 1:3) - SATO CL4NX Programming Reference Manual

[ESC+B] Barcode (Ratio 1:3)

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifies a barcode with a ratio of 1:3 between narrow bar and wide bar.
[Format]
<B>abbcccn...n
• Parameter
a [Barcode type] = Refer to table below
b [Narrow bar width] = Valid range : 01 to 36 dots
c [Barcode height] = Valid range : 001 to 999 dots
n [Print data] = Data
Barcode types (Ratio of module composition may not be available depending on the barcode.)
a Barcode type
0 CODABAR (NW-7)
1 CODE39
2 ITF
3 JAN/EAN13
4 JAN/EAN8
5 Industrial 2of5
ESC
<1B>
16
Nil
When the power is OFF
Valid range within items
Valid range between items
Set print data including Start/Stop character.
Start/Stop characters are [A, B, C, D, E, N, T, a, b, c, d, e, n, t,
*]. Note that scan result of the characters [E, N, T, a, b, c, d, e,
n, t, *] is [D, B, A, A, B, C, D, D, B, A, C].
e.g.) When barcode print data is [123], specify [A123A].
Barcode character pitch becomes enabled.
For print data, refer to the CODABAR (NW-7) code table.
Set print data including Start/Stop character.
Start/Stop Character is [*].
e.g.) When barcode print data is [12345], specify [*12345*].
Barcode character pitch becomes enabled.
For print data, refer to the CODE39 code table.
Specify print data in even-numbered digit.
If specifying in odd-numbered digit, add "0" to the head of print
data.
For print data, refer to the ITF code table.
This barcode has no guard bars and no human-readable
characters
For print data specifications, refer to table of JAN/EAN13 code.
This barcode has no guard bars and no human-readable
characters
For print data specifications, refer to table of JAN/EAN8 code.
Barcode character pitch is enabled.
181
B
<42>
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Description
Parameter
abbcccn...n
Ratio
1:3
1:3
1:3
Fixed
(11,12,13
digits)
Fixed
(7,8 digits)
1:3