[Esc+Dc] Datamatrix (Ecc200) Data Specify (Compatible Command) - SATO CL4NX Programming Reference Manual

[ESC+DC] DataMatrix (ECC200) Data Specify (Compatible
command)
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying data for DataMatrix (ECC200).
[Format] (Data specification part)
<DC>n...n
• Parameter
n [Print data] = Data
[Coding Example]
Cell width: 02, Cell pitch: 02, Number of cells per line: 000 (Auto setup), Number of cell lines: 000
(Auto setup), Print data: 1234567890
<A>
<V>100<H>200
<BX>01200202000000001
<DC>1234567890
<Q>2
<Z>
[Supplementary Explanation]
• DataMatrix (ECC200) can specify from 00H to FFH except for printer control code of 05H, 10H,
11H, 18H, 1BH. When specifying control code for data, use DataMatrix<2D50>.
Data format
* Value in above table shows the maximum number of data that can be specified as barcode data.
[Precautions during use]
• This is the command of the old specification. Recommend the use of <2D50>.
Parent topic 2D Code
ESC
<1B>
16
Nil
When the power is OFF
Valid range within items
Valid range between
items
Data format
Numeric
Alphanumeric
Binary (00H to FFH)
316
DC
<44> <43>
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Number of data
3116
2335
1556
Parameter
n...n