[ESC+kD] 40 x 40 dots Kanji in vertical line with 1-byte
character
Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying 40 x 40 (width x height) dots horizontal written kanji character print and W20 x H40 dots
half size character in vertical line.
[Format]
<kD>an...n
•
Parameter
a [Kanji selection mode]
H: HEX characters
B: Binary code
I: HEX characters, smoothing function
C: Binary code, smoothing function
J: HEX characters, highlighting function
D: Binary code, highlighting function
K: HEX characters, smoothing and highlighting function
E: Binary code, smoothing and highlighting function
n [Data] = Print data. For the available character codes, refer to Kanji code (ESC+KC) command.
[Coding example]
Shift JIS HEX characters, Data: 株式会社サト-
<A>
<KC>1
<V>100<H>200<P>2<L>0305
<CC>0
<kD>H8A948EAE89EF8ED0BBC4B0
<Q>2
<Z>
[Supplementary Explanation]
•
HEX characters = Chinese Code 4 bytes ASCII / 1 Chinese character (Ex.Shift JIS code)
•
Binary code = Chinese Code 2 bytes / 1 Chinese character (Ex.Shift JIS code)
•
Smoothing function validity range = Horizontal/vertical valid range: factor 3 to 12
•
Highlighting function validity range = Horizontal/vertical valid range: factor 1 to 5
•
Print result of two bytes under bar "_" is vertical line.
•
Some JIS213 Kanji (JISX213) characters have values between U+10000 to U+10FFFF.
ESC
<1B>
16
Nil
When the power is OFF
Valid range within items
Valid range between items
163
kD
<6B>
<44>
16
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Parameter
an...n