Table of Contents
Advertisement
Page 314 of 378
Table 52
NVRAM IP configuration commands (Part 2 of 2)
Command
NVRGWSet IP gateway
Example:
NVRSMSet subnet mask
Example:
NVRIPShow
Example:
nvramLeaderSet
Example:
nvramLeaderClr
Example:
NVRClear
Example:
setLeader IP address, IP
gateway, subnet mask
Example:
clearLeader
Example:
553-3001-202
Standard 1.00
Maintenance
Description
Set the default gateway address in NVRAM.
ITG> NVRRGWSet "47.0.0.1"
Set the subnet mask in NVRAM.
ITG> NVRRSMSet "255.255.240.0"
Print the values of the IP parameters that exist in NVRAM.
ITG> NVRIPShow
Set the leader bit in NVRAM.
ITG> nvramLeaderSet
Clear the leader bit in NVRAM, but does not erase the IP
parameters in NVRAM.
ITG> nvramLeaderClr
Clear IP parameters in NVRAM.
ITG> NVRClear
The one command that does all the necessary actions to make
a Leader. Sets IP address, gateway, subnet mask, boot method
to static, and Leader bit in NVRAM.
ITG> setLeader "47.23.45.67", "47.0.0.1", "255.255.240.0"
The one command that does all the necessary actions to clear
the Leader information in NVRAM and set the boot method to
use bootp, thus, making the card a Follower.
ITG> clearLeader
April 2000
Advertisement
Table of Contents
