Nortel ISDN Signaling Link Description, Installation And Operation page 189

Table 37
LD 86 - Configure route list block with Step Back on Congestion on ISDN (Part 2 of 2)
Prompt
TOD
FRL
DMI
SBOC
...
Table 38
LD 87 - Configure the Coordinated Dialing Plan (CDP)
Prompt
REQ
FEAT
CUST
TYPE
...
RLB
...
ITG Trunk 2.0 ISDN Signaling Link (ISL)
Install and configure ITG ISL Trunk node
Response
0
RRA
Response
NEW
CDP
xx
DSC
TSC
xx
Description
Time of Day Schedule
If required, turn off ITG route during peak traffic
periods on the IP data network
Facility Restriction Level
Set FRL appropriately to control access to the ITG
ISL Trunk route.
Do not use a Digit Manipulation table in the RLB
entry for the ITG ISL Trunk route.
For ESN translations that are not used for
non-call-associated signalling, digit manipulation
can be defined on the ITG ISL Trunk node dialing
plan in the Digits dialed tab.
Step Back on Congestion.
Re-route all. Enter RRA at the SBOC prompt to
enable Fallback to alternate circuit-switched trunk
route
Description
Add new data.
Coordinated Dialing Plan.
Customer number.
Distant Steering Code.
Trunk Steering Code.
Route List Entry created in Overlay 86.
Description, Installation and Operation
Page 189 of 378