Installation Procedure Summary - Nortel ISDN Signaling Link Description, Installation And Operation

Page 154 of 378

Installation Procedure Summary

Table 26
Installation procedures (Part 1 of 2)
Step Procedure
1 Create the ITG Trunk Installation Summary Sheet
2 Install and cable ITG trunk cards
Card installation procedure
3 Configure ITG Trunk data on the Meridian 1
Configure the ISL D-channel on the Meridian 1 for the DCHIP card
Configure ISDN feature in customer data block
Configure ITG ISL trunk cards and units
Configure dialing plans within the corporate network
Disable the ITG Trunk cards
4 Configure ITG Trunk data on MAT
Add an ITG Trunk node on MAT manually
Add a node and configure general node properties
Single vs. separate subnets for T-LAN and E-LAN
Configure card properties
Configure DSP profiles for the ITG Trunk node
Configure SNMP Traps/Routing and IPs tab
Configure Accounting server
Set Security for MAT SNMP access
Exit node property configuration session
Create the ITG Trunk node dialing plan using MAT
Retrieve the ITG Trunk node dialing plan using MAT
553-3001-202 Standard 1.00
Install and configure ITG ISL Trunk node
Table 26 lists the procedures to install and configure an ITG Trunk node. You
must complete all installation and configuration tasks before you transmit the
configuration data to the ITG Trunk cards.
April 2000
Page
page 156
page 158
page 158
page 174
page 174
page 178
page 182
page 185
page 191
page 191
page 192
page 192
page 193
page 195
page 199
page 204
page 205
page 207
page 208
page 208
page 213