Table of Contents
Advertisement
Access the ITG card
ITG card overlay commands
Table 45
Supported Overlay 32 commands (Part 1 of 2)
Command
DISC l s c
DISI l s c
DISU l s c u
ENLC l s c
ENLU l s c u
IDC l s c
ITG Trunk 2.0 ISDN Signaling Link (ISL)
Telnet access
You can connect to the ITG card using telnet. This provides access to the ITG
shell. A telnet session has higher priority than a serial session. A telnet session
started during an continuing serial session disables the serial connection for
the period of the Telnet session. The serial session continues when the telnet
session ends.
Serial access
You can connect to the ITG card by physically connecting to the serial port.
This provides access to the ITG shell. If there is an active telnet session
ongoing while the serial connection is established, the serial connection will
not be active as telnet access has priority. The telnet session must be
terminated in order for the serial connection to become active.
System level maintenance of the ITG card is performed using Overlay 32 or
Overlay 36. (See Tables 45 and 46.)
Function
Disable the indicated card, where: l = loop, s = shelf, and
c = card.
Disable the indicated card when idle, where: l = loop, s =
shelf, and c = card.
Disable the indicated unit, where: l = loop, s = shelf,
c = card, and u = unit.
Enable the indicated card, where: l = loop, s = shelf, and
c = card.
Enable the indicated unit, where: l = loop, s = shelf,
c = card, and u = unit.
Print the Card ID information for the specific card, where:
l = loop, s = shelf, and c = card.
Maintenance
Description, Installation and Operation
Page 303 of 378
Advertisement
Table of Contents
