Table 43
Overlay 32 - ITG maintenance commands
STAT l s c
STAT l s c u
Disable the indicated ITG card
To disable the indicated ITG card in LD 32, use the following command:
DISC l s c
Disable the indicated ITG card when idle
To disable the indicated ITG card when idle in LD 32, use the following
command:
DISI l s c
Disable an indicated ITG port
To disable a indicated ITG port in LD 32, use the following command:
DISU l s c u
ITG Trunk 2.0 ISDN Signaling Link (ISL)
OA&M using the ITG shell CLI and overlays
Command
Function
Print the Meridian 1 software status
of the indicated card.
where: l = loop, s = shelf, c = card
Print the Meridian 1 software status
of the indicated unit,
where: l = loop, s = shelf, c = card,
u = unit
Disable the indicated ITG card,
where: l = loop, s = shelf,
c = card
Disable the indicated ITG card
when idle, where: l = loop, s = shelf,
c = card
Disable the indicated ITG unit
(port), where: l = loop, s = shelf,
c = card, u = unit
Description, Installation and Operation
Page 291 of 378