Eaton 9355-F47 Unirom User Manual page 95

8. Disconnect the two battery trays by disconnecting the black
9. Place an adjustable-height table (customer-provided) near the UPS.
10. Place the spike of a T-bar handle through one of the holes on the
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide
connector from the top tray from the red connector from the
bottom tray. See Figure 45.
Figure 45. Disconnecting the Battery Trays
Adjust the table so its height is level with the top battery tray.
top battery tray lip. Pull the tray onto the table.
S
164201642 Rev C www.eaton.com/powerquality
UPS MAINTENANCE
89