Eaton 9355-F47 Unirom User Manual page 45

5. Remove the battery trays and the packages containing wiring, nylon
6. Verify that the batteries to be installed are the type listed in
7. For the first tray, set the battery tray on an adjustable-height table
8. Install 12 vinyl caps on the battery tray dividers as shown in
9. Insert eight batteries into the battery tray (see Figure 20).
10. Connect the batteries in the tray as shown in Figure 19 and
11. Secure the batteries to the tray, using 5 spacers and 3 nylon straps.
Spacers (5)
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide
straps, spacers, and vinyl caps from the UPS cabinet.
"Battery Type" on page 84. Use batteries of the same age, type,
and manufacturer so that UPS performance is not affected.
(customer-provided). Adjust the table so its height is at a
comfortable working level.
Figure 19.
Figure 20.
See Figure 19 and Figure 20 for spacer and strap placement.
Figure 19. Battery Tray without Batteries
S
164201642 Rev C www.eaton.com/powerquality
INTERNAL BATTERY INSTALLATION
Nylon Straps
(3)
Vinyl Caps (12)
39