Eaton 9355-F47 Unirom User Manual page 26

UPS SETUP
20
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide
9. Place the front crate panel, retained from the UPS packing crate,
onto the skids at the back of the pallet. Verify that the flat side of
the crate panel is facing up, with the beveled edge pointing away
from the pallet.
Secure the crate panel to the skids with two bolts. See Figure 7.
10. Slowly roll the UPS toward the rear of the pallet. If needed, adjust
the leveling feet so that the UPS will roll.
Figure 7. Unloading the UPS
S
164201642 Rev C www.eaton.com/powerquality