Eaton 9355-F47 Unirom User Manual page 27

UPS SETUP
NOTE In the following step, the crate panel will act as a ramp. Be sure to support the front
and back of the UPS when rolling it off the pallet to prevent tipping.
11. With the UPS supported, slowly roll the UPS down the ramp until
the UPS is clear of the pallet and ramp (see Figure 8).
Figure 8. Clearing the Pallet and Ramp
12. Roll the UPS to the desired location.
13. Continue to the following chapter, "UPS Installation."
NOTE If installation is delayed, protect the unpacked UPS from moisture, dust, and other
harmful contaminants. Failure to store and protect the UPS properly may void your warranty.
S
164201642 Rev C www.eaton.com/powerquality 21
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide