Inlay Installation - Regency Liberty LRI4E series Owners & Installation Manual

INLAY INSTALLATION

1. Remove Vignette faceplate from unit and lay on a soft surface.
tooltip
2. Remove 4 screws from the back of the Vignette faceplate in loca-
tions shown below—to remove the safety screen assembly.
tooltip
Remove 4 screws to remove safety screen assembly
919-661
INLAY INSTALLATION
3. Position the inlay face down on the back of the Vignette faceplate
and reinstall the safety screen assembly (reverse Step 2).
tooltip
4. Reinstall the Vignette faceplate with inlay onto unit—reverse Step 1.
1
Inlay
Vignette Faceplate
(back)
Safety screen assembly
Final Install
LRI4E / HRI4E-11 Direct Vent Gas Insert
installation
05.18.16
| 43