Table of Contents
Advertisement
C2000 and C4000 1.0.x Hardware Guide
Storing Modules and Components
Retain the packaging in which a component was shipped, and use this packaging to
store the item.
CAUTION: Failure to store electronic components correctly can lead to damage of
these items.
Follow these guidelines for storing components:
Cleaning the System
Clean the system with a dry cloth every few weeks to prevent excessive dust
accumulation. This cleaning helps to maintain the efficiency of the cooling system
and to prevent damage to electronic components.
WARNING: Do not insert any metal object, such as a screwdriver, or place your hand
into an open slot when the system is on. Remove jewelry (including rings, necklaces,
and watches) before working on equipment that is connected to power lines. These
actions prevent electric shock and serious burns.
CAUTION: When cleaning the system, wear an antistatic device. This action helps
to protect components from damage by electrostatic discharge.
Removing and Installing a Fan
Both C-series models have two cooling fans that provide forced air cooling for
components in the system. Each fan is hot-swappable; you can replace it without
powering down the system. You can monitor fan status by observing the TEMP LED.
32
Storing Modules and Components
Store each component in a separate antistatic bag.
Store components in an antistatic plastic container. Some of these containers
can accommodate several components in separate compartments.
Do not store multiple components in an antistatic bag or container where they
can touch other items.
(Optional) Store the item in its antistatic bag or container within the protective
packaging or padded box that the item was shipped in.
Advertisement
Table of Contents
