Reinitializing An Active Disk; Viewing Information About Disks On A C-Series Platform - Juniper C2000 Hardware Manual

Controller Tasks
TaskId Function Done% Container State Specific1 Specific2
------ -------- ------- --------- ----- --------- ---------
100 Rebuild 0.3%

Reinitializing an Active Disk

You can reinitialize a disk that is already active in a C-series platform.
To reinitialize a disk:

Viewing Information About Disks on a C-series Platform

To view information about disks in the C-series platform:
C:ID:L Device Type Blocks
------ -------------- --------- ----------- ---------------- ------ ----
0:00:0 Disk
0:01:0 Disk
Smart Method of
Capable Informational
C:ID:L Device Exceptions(MRIE)
------ ------- ----------------
0:00:0 Y 6
0:01:0 Y 6
0 RUN 00000000
Initialize the disk.
user@host> request disk initialize device 0 | 1 force
The command generates data on the disk that enables the disk controller to
manage the disk. The disk controller copies data from the other disk and
establishes mirroring between the two disks.
Enter the show disk status command.
user@host> show disk status
Bytes/Block Usage
145226112 512 Initialized
145226112 512 Initialized
Enable
Exception Performance
Control Enabled
--------- -----------
Y
Y
Chapter 8: Managing RAID Disks on a C-series Platform
00000000
Shared Rate
NO 150
NO 150
Error
Count
------
N 0
N 0
Managing Disks in a C-series Platform
41