Juniper C2000 Hardware Manual page 40

C2000 and C4000 1.0.x Hardware Guide
To configure the system to accept Telnet connections:
Adding an Admin User Account
Although
used to enter commands and statements at the CLI. Therefore, you must set up an
admin account to allow further configuration. You can use a built-in class, such as
super-user.
To configure an account for an administrative user:
1.
2.
3.
4.
5.
6.
26
Adding an Admin User Account
In edit mode, type the following command.
[edit]
user@host# set system services telnet
root access is used for initial configuration of the system, user accounts are
Create an account for an administrative user.
[edit]
user@host # edit system login user user
For example:
[edit]
user@host # edit system login user myadmin
Set the class for the administrative user to the login class that you created.
[edit system login user myadmin]
user@host # set class class
For example:
[edit system login user myadmin]
user@host # set class super-user
Specify the name of the administrative user.
[edit system login user myadmin]
user@host # set full-name John Doe"
Set the CLI editing level to expert.
[edit system login user myadmin]
user@host# set level expert
(Optional) Specify that a space be used for command completion.
[edit system login user myadmin]
user@host # set complete-on-space on
Verify that the configuration for the administrative user is correct.
[edit system login user myadmin]