Table of Contents
Advertisement
6.4.1.1
Rotating the connector at the motor
Power connectors and signal connectors can be rotated to a different angle to a limited
extent.
Use a suitable socket connector to rotate the angle plug.
Unscrew and open the socket connector completely to avoid damaging the pin contacts.
For encoders with integrated Sensor Module (DQI), the cable outlet towards the top is fixed.
The optional M17 round connector can be rotated.
Note
Rotating the connectors
• Do not exceed the permissible range of rotation.
• To ensure the degree of protection, do not rotate more than 10 times.
• Rotate the connector using a mating connector that matches the connector thread. Only
rotate Sensor Modules by hand. Use of tools is not permissible.
Ability to rotate the power connector on motors with DRIVE-CLiQ interface RJ45
Motor
Angle α
1FK703
122°
1FK704
135°
1FK706
Rotation range of the power connector
S-1FK7 DYA G2 synchronous motors with planetary gearbox
Operating Instructions, 05/2018, A5E44881183B AA
Angle β
Connector size
208°
1
195°
1
Connecting
6.4 System integration
Drawing
59
Advertisement
Table of Contents
