Table of Contents
Advertisement
Technical data and dimension drawings
The technical data for the motors with the various shaft heights is provided in the
Configuration Manual
WW&pnid=13349&dl=en) of 1FK7 G2 in Chapter "Technical data and characteristics".
Adapt the values for operating the motors according to Chapter "Derating factors (Page 28)".
Dimension drawings for 1FK7 DYA G2 are available in the product notification Product
notification (https://support.industry.siemens.com/cs/ww/de/view/109756257/en) or in the DT
Configurator.
DT CONFIGURATOR
In the DT CONFIGURATOR - you can simply and quickly find
● dimension drawings
● 2D/3D CAD data
The DT CONFIGURATOR supports you when generating plant/system documentation
regarding project-specific information.
Note
The 3D model in the DT CONFIGURATOR is a simplified representation that does not show
all of the details.
You can find further information on the Internet at DT CONFIGURATOR
(http://siemens.de/dt-konfigurator):
S-1FK7 DYA G2 synchronous motors with planetary gearbox
Operating Instructions, 05/2018, A5E44881183B AA
(https://support.industry.siemens.com/cs/document/55379345?lc=de-
12
97
Advertisement
Table of Contents
