Siemens SIMOTICS S-1FK7 DYA Generation 2 Operating Instructions Manual page 79

Synchronous motors with planetary gearbox
Table of Contents

Advertisement

Table 7- 2
Have all touch protection measures for moving and live parts been fitted and are they
functional?
Has the motor been correctly mounted and aligned?
Can you rotate the rotor without it touching the stator?
Have all fastening screws, fastening elements, and electrical connections been tight-
ened with the prescribed torques and properly attached?
Do the operating conditions correspond to the data specified on the rating plate?
Do the output elements have the correct setting conditions according to type?
Examples:
Table 7- 3
Has the motor been connected so that it rotates in the specified direction?
Have the minimum insulation resistance values been maintained?
Have the grounding and equipotential bonding connections been correctly estab-
lished?
Is the specified limit speed n
Table 7- 4
Has it been ensured that speeds higher than the maximum speed n
reached?
Have all supplementary motor monitoring devices been correctly connected and are
they working properly?
Table 7- 5
Natural cooling
Have you adjusted the torque or the power of the motor at the converter based on the
table in Chapter "Derating factors (Page 28)"?
Follow the Operating Instructions of the converter.
Table 7- 6
Is the brake open when the operating voltage is applied?
Does the brake open and close correctly?
S-1FK7 DYA G2 synchronous motors with planetary gearbox
Operating Instructions, 05/2018, A5E44881183B AA
Checklist (2) - checks regarding the mechanical system
Have the couplings been aligned and balanced?
Has the belt drive tension been correctly adjusted?
Have the gear tooth flank and gear tooth tip play as well as radial play been cor-
rectly adjusted for geared outputs?
Checklist (3) - checks regarding the electrical system
max
Checklist (4) - Monitoring equipment checks
Checklist (5) - Cooling system checks
Checklist (6) - Checks regarding the optional brake
Check
Check
maintained during the operation on the converter?
Check
Check
Check
Commissioning
7.2 Checklists for commissioning
cannot be
max
OK
OK
OK
OK
OK
77

Advertisement

Table of Contents
loading

Table of Contents