Siemens SIMOTICS S-1FK7 DYA Generation 2 Operating Instructions Manual page 74

Connecting
6.4 System integration
Removal
Procedure
1. Turn the locking ring of the connector counterclockwise into the "unlocked" position.
1
2. Check that the two tabs are disengaged from the latches.
3. Pull the connector out of the RJ45 socket of the Sensor Module.
You have released the DRIVE-CLiQ connection.
❒
72
Turn the locking ring counterclockwise.
→ Both tabs are pressed away by the latches.
S-1FK7 DYA G2 synchronous motors with planetary gearbox
Operating Instructions, 05/2018, A5E44881183B AA