Routing Cables In A Damp Environment; Connecting To A Converter - Siemens SIMOTICS S-1FK7 DYA Generation 2 Operating Instructions Manual

Connecting
6.4 System integration
6.4.1.2

Routing cables in a damp environment

Note
If the motor is mounted in a humid environment, the power and signal cables must be routed
as shown in the following figure.
Figure 6-4
6.4.2

Connecting to a converter

Selecting and connecting the cables
● To connect the motor to a converter, use MOTION-CONNECT cables or shielded
connecting cables.
Note
The cable shielding, made up of as many strands as possible, must have a high electrical
conductivity. Braided shields made of copper or aluminum are well suited.
62
Routing cables in a damp environment
S-1FK7 DYA G2 synchronous motors with planetary gearbox
Operating Instructions, 05/2018, A5E44881183B AA