Decommissioning; Removing The Motor; Dismantling The Motor; Disposal - Siemens SIMOTICS S-1FK7 DYA Generation 2 Operating Instructions Manual

Decommissioning and disposal

11.2 Decommissioning

11.2 Decommissioning
11.2.1

Removing the motor

Removing the motor must be performed and/or supervised by qualified personnel with
appropriate expert knowledge.
Removing the motor from the machine
Procedure
1. Disconnect all electrical connections.
2. Remove all liquids such as oil, water.
3. Remove all supply lines.
4. Remove the fixing elements from the motor.
5. Transport the motor to a suitable location for storage and dismantling.
You have removed the motor.
❒
11.2.2

Dismantling the motor

Note
The rotor in a motor containing permanent magnets must only be removed by the
manufacturer.
Contact the Siemens Service Center.
11.3

Disposal

Recycling and disposal
For environmentally-friendly recycling and disposal of your old device, please contact a
company certified for the disposal of waste electrical and electronic equipment, and dispose
of the old device as prescribed in the respective country of use.
96
S-1FK7 DYA G2 synchronous motors with planetary gearbox
Operating Instructions, 05/2018, A5E44881183B AA