Atlas XENOTEST BETA LM Operating Manual page 43

ATLAS
DISPLAY TEXT
K) Input of rel. humidity:
r.h. (0; 10 ... 95%)
PH1:___ PH2: Rain
Comment: Phase 2 of the humidity function is not applied because the rain function was selected.
L) Input of phase time (min):
PH1:___ PH2:___
Comment: The phase time can be chosen between „1" und „999". When programming one phase only,
this phase is repeated permanently after termination of the phase time.
M) Input of switch-off criterion:
Switch-off criterion:
Total time
Irradiation time
Dose
Several
switch-off criteria ?
YES: ENTER NO: ESC
Comment: The programming of several switch-off criteria is used for several defined stops during the
the course of the program, e.g. for specimen control.
N) Input switch off time:
Switch-off time [h]:
XENOTEST BETA
Safety hints
Program example on
Function
XENOTEST BETA
= 1
= 2
= 3
Unit set-up
Features
Test set-up
Operating manual XENOTEST BETA LM
INPUT/KEY PAD
40
ENTER
102
ENTER
18
ENTER
1
ENTER
ESC
24
ENTER
Options and accessory
Unit description
of the XENOTEST BETA
Care and cleaning
Maintenance
Start-up
List of options
and accessories
Page 43