Program Control - Atlas XENOTEST BETA LM Operating Manual

ATLAS
4.1.1 Program control (fig. 4)
The control panel on the front side of the apparatus
controls and regulates the course of the input
weathering program. The program keyboard can be
Figure 4: Program control
8
9
7
6
1 4-line LCD display for user
guidance and data display
2 Data key for data display
3 Print key to print out the stored
program, parameter measurements
and system status from the printer
4 Program input keyboard
5 Enter key to confirm the input values
6 Escape key
7 Key-operated switch to allow locking
of the keyboard when the system is
running
8 START key
XENOTEST BETA
Safety hints
Program example on
Function
XENOTEST BETA
11
10
0
1
1
Start Sto p
4
7
ES CAP E
Unit set-up
Features
Test set-up
Operating manual XENOTEST BETA LM
locked during operation of the machine against
unauthorized access by means of a key-operated
switch.
1
12
2 3
DAT A P RIN T
5 6
8 9
0
E NTER
9 Green LED light comes on when
main switch is on
10 STOP key
11 Red LED flashes when the program is
interrupted with the STOP key or when
the system is defective. The red LED is
continuously on when certain limit values
are exceeded
12 Key to interrupt the rotation of the
specimen holder carousel during a running
program resp. to move the carousel when
a program is interrupted
Options and accessory
Unit description
of the XENOTEST BETA
Care and cleaning
2
3
4
5
Start-up
List of options
Maintenance
and accessories
Page 15