Xenotest Beta Features - Atlas XENOTEST BETA LM Operating Manual

Operating manual XENOTEST BETA LM

2. XENOTEST BETA Features

The following table shows the physical data of the XENOTEST BETA .
Pos. Feature
1 Control system / Microprocessor
2 Integrated sensors:
• XENOSENSIV for irradiance and
black standard temperature
• Sensor for test chamber temperature
and rel. humidity
3 Irradiation:
Filter
• XENOCHROME 270
• XENOCHROME 300
• XENOCHROME 320
4 Weathering surface
5 Xenon lamps NXE 2200
6 Nominal rating of lamp
7 Power consumption
8 Dimensions:
Width x Depth x Height
9 Weight
10 Options:
External sensors
Printer
Interface
11 Electrical connection
12 Noise level
XENOTEST BETA
Safety hints
Program example on
Function
XENOTEST BETA
Page 10
Unit set-up
Features
Test set-up
Data
• 10 prestructured programs
• 12 cycles per program
Wavelength range 300 - 400 nm
Surface temperature --> 130 °C
Ambient temperature --> 80 °C
10 - 95 %
Irradiance:
Wavelength range 300-400 nm
60 - 165 W/m²
45 - 120 W/m²
35 - 100 W/m²
• Sample holder dimensions 320 mm x 80 mm
• 16 sample holders
• Total surface approx.. 4000 cm²
3 lamps / life time min. 1500 hours (within irradiance
range)
2200 VA / lamp with readjusting
max. 12 kVA
900 mm x 1200 mm x 1800 mm
approx. 400 kg
• XenoCal UV
• XenoCal Global
• Black standard temperature sensor
• White standard temperature sensor
Thermoprinter
RS232 / RS 485
400 V ± 10 %, 50-60 Hz, (3/N/PE),
CEE (32A, 5pol.,6h)
< 75 db(A)
Options and accessory
Unit description
of the XENOTEST BETA
Care and cleaning
ATLAS
Start-up
List of options
Maintenance
and accessories