Sample Holders Set Standard; Special Sample Holder; Exposure Cards; Cover Plates - Atlas XENOTEST BETA LM Operating Manual

Operating manual XENOTEST BETA LM
5.2.2 Standard sample holder
set (fig.21)
The standard sample holder set consists of 16
sample holders with the dimensions 320mm x
80mm x 10mm maximum sample thickness (no.
56076543). For the fitting of thin, unstable samples
in the sample holder a set of 16 fixing sheets is
enclosed.
Fitting: First place the specimen in the sample hol-
der. Afterwards the fixing sheet is put on and fixed
with the spring-operated clamps.
Figure 21: Sample holder set standard
5.2.3

Special sample holder

Special sample holders are used to insert different
sample dimensions within the XENOTEST series.
Unit Sample
holder
XENOTEST 16
1200
XENOTEST 28
ALPHA
150 / 150S
XENOTEST BETA
Safety hints
Program example on
Function
XENOTEST BETA
Page 30
Sample / Dimensions
Length x Width x
Thickness
3 samples
100mm x 68mm
x 10mm
2 samples
135mm x 45mm
x 10mm
Unit set-up
Features
Test set-up
5.2.4

Exposure cards

Certain standards specify the make-up of the
specimens, e.g. point 5 of DIN 54004 requires the
specimen to be secured to a card.
100 exposure cards with the dimensions 80mm x
320mm x 0,05mm (No. 56076547).
5.2.5 Cover plates (fig. 22)
To make contrast between the irradiated and non-
irradiated sections of the specimen clearly visible,
cover plates are available with 3 differently sized
apertures of 9mm, 18mm und 27mm.
Fitting: At first the cover plate is inserted into the
sample holder, followed by the specimen which is
then fixed by means of the spring-operated clamps.
Figure 22: Cover plates
Options and accessory
Unit description
of the XENOTEST BETA
Care and cleaning Maintenance
ATLAS
Start-up
List of options
and accessories