Xenosensiv Sensor; Xenosensiv Sensor Support Sheet; Calibration Adapter And End Plug - Atlas XENOTEST BETA LM Operating Manual

ATLAS
5.2.6

XENOSENSIV sensor

(fig. 23)
The XENOSENSIV sensor collects the values of
irradiation in a wavelength range of 300-400 nm as
well as the values of the black standard temperature
in a surface temperature range up to 130 °C at
specimen level.
The XENOSENSIV sensor enables constant re-
gulation of chosen irradiation and black standard
temperature values.
Figure 23: XENOSENSIV sensor
XENOTEST BETA
Safety hints
Program example on
Function
XENOTEST BETA
Unit set-up
Features
Test set-up
Operating manual XENOTEST BETA LM
5.2.7 XENOSENSIV sensor
support sheet (fig. 24)
The support sheet is used to fix the XENOSENSIV
sensor in the test chamber.
Figure 24: Support sheet
5.2.8 Calibration adapter and
end plug
To calibrate the XENOSENSIV sensor (chapt. 6.5)
a calibration adapter (fig. 27) is used. If no sensor
is inserted, the contact plug in the test chamber is
secured by means of an end plug (chapt. 6.6,
fig.28).
Options and accessory
Unit description
of the XENOTEST BETA
Care and cleaning
Maintenance
Start-up
List of options
and accessories
Page 31