TabletKiosk Sahara Slate PC i500 User Manual page 84

6. The Wizard should com-
plete the pairing process
and inform you that your
device is now paired and
available. You will then be
returned to the Bluetooth
Settings panel where your
Bluetooth device will be
listed in the window.
7. If there were addi-
tional Bluetooth devices
discovered by the Wizard,
it should pop a new window asking if you would like to pair
the additional devices. If the wizard does not appear, tap on
the "New Connection" button to begin pairing your remain-
ing devices.
8. If your additional devices are not found, simply place the
target Bluetooth device into pairing mode again and start
the process over. As pairing mode broadcasts an active
signal, it draws additional power and therefore is set to last
only a short duration of time to conserve battery life.
Your device(s) should now be connected to your tablet and
available for use. If successful, the Bluetooth device(s) will be
listed in the Bluetooth Settings window and a Bluetooth logo in
the System Tray will be present with a green "B".
Red icon means
Bluetooth transmitter
is off.
82 Chapter 04: Using Your Sahara Slate PC with Microsoft® Windows® 7
White icon means Green icon means
Bluetooth transmitter Bluetooth transmitter
is on but no device(s) is on and device(s)
connected. connected.