Using The Tabletkiosk Modular Expansion System; To Attach An Expansion Module - TabletKiosk Sahara Slate PC i500 User Manual

You are now ready to restore your system back up or install a
new version of your operating system. For more information on
restoring your operating system, refer to the section Restoring
Your Sahara Slate PC from the Troubleshooting chapter.

Using the TabletKiosk Modular Expansion System

Your Sahara Slate PC features a modular expansion system that
allows you to add task purposed functionality to your Tablet PC
simply by adding specific modules. Examples of these modules
include:
USB 2X2 adds two additional USB 2.0 ports.
WWAN module adds 3G data capability, and soon 4G data
capability.
SCAN module adds 2D/1D barcode scanning capability.
P.O.S. module features a Magtek Magnetic Stripe Reader for
credit card and ID card data capture.
Based upon Universal Serial Bus (USB) technology, TabletKiosk
expansion system modules are hot swappable. This means you
can add or remove modules without having to shut down or
restart the system.
As with other standard USB peripherals, if your module came
with a device driver disc, or the module's instructions tell you to
download a device driver, do so and then install the device driver
BEFORE you plug in the module for the first time.

To attach an expansion module:

1. Turn the Sahara Slate PC
i500 around so you are
looking at the back of
the system. Locate the
expansion port's cover
located on the top left
above the battery one (1)
bay.
120 Chapter 06: Upgrading Your Sahara Slate PC