Enabling, Disabling And Adjusting Touch Screen Features - TabletKiosk Sahara Slate PC i500 User Manual

In order to calibrate the capacitive touch screen:
1. Tap on "START Control
Panels Hardware and
Sound Tablet PC Settings"
2. From the "Display" tab, tap
on the "Calibrate..." button.
3. If your Sahara Slate PC
only has a capacitive touch
screen, you should see
the Calibration screen.
If you have a dual mode
digitizer+capacitive touch
screen, you will be present-
ed with a dialog box that
asks you whether you want to
calibrate for pen or touch. Tap
the touch button and the touch
calibration screen will appear.
DUAL MODE SCREEN NOTE: To
calibrate the touch screen you must
use either your finger or a stylus
meant for use on a capacitive touch screen. If you attempt to use the
digitizer stylus to calibrate the touch screen, you will be presented
with an error message.
4. Follow the on-screen instructions to calibrate your screen.
Tap in the center of each of the crosshairs that appear and
then choose to save or discard the calibration data depend-
ing on whether you are satisfied that you accurately touched
the center of each crosshair.

Enabling, Disabling and Adjusting Touch Screen Features

The "Touch" and "Panning" tabs in the "Pen and Touch" control
panel are where the settings that control the touch interface
reside. To get there, tap on "START
and Sound Pen and Touch
46 Chapter 04: Using Your Sahara Slate PC with Microsoft® Windows® 7
Control Panel Hardware
Change touch input settings".