Step 2: Connect The Tablet Pc To An External Power Source; Step 3: Connecting Applicable Peripherals And Networking Cables - TabletKiosk Sahara Slate PC i500 User Manual

The batteries on the Sahara Slate PC i500 are hot swappable.
This means you can change out discharged batteries for spare,
charged batteries without first having to power off the system.
Note, however, that the Sahara Slate PC does not have a short-
term internal battery. Therefore, you must replace the first
discharged battery with a charged battery before removing the
second battery if both batteries are completely drained.
IMPORTANT: If you plan on removing the second battery before
replacing the first battery you just removed with a charged spare bat-
tery, make sure you first shut down the Sahara Slate PC before actually
removing the second battery to prevent data loss.

Step 2: Connect the Tablet PC to an External Power Source

Locate the AC adapter and the power cord. Plug the power cord
securely into the AC adapter. Plug the AC adapter's connection
cable into the "DC Power In" port on the top of the Tablet PC.
Once the adapter plug is securely in place, plug the power cord
into an external power socket.
NOTE: When you first connect the Tablet PC into an external power
source, the battery charge indicator will begin to glow orange. When
the battery is fully charged the indicator will turn green. See the
section entitled Battery Usage and Care for tips on maximizing battery
life and performance.
Plug the power cord into the DC Power In
port on the top of the Sahara Slate PC.

Step 3: Connecting Applicable Peripherals and Networking Cables

If you would like to use any external peripherals with the system
(i.e. USB mouse, USB keyboard, etc.) or are planning to connect
20 Chapter 01: Getting Started
Plug the power cord into the AC adapter
brick and then into a wall outlet.