Usb Problems/Solutions; Contacting Your Dealer - TabletKiosk Sahara Slate PC i500 User Manual

USB Problems/Solutions

Problem Possible Cause
An external device The external device is
does not work when not receiving power.
it is connected to one
The external device is
of the USB ports.
defective.
Windows is not rec-
ognizing the device
properly.

Contacting Your Dealer

If you still have a problem, the next step is to contact the dealer
where you purchased your Sahara Slate PC i500.
Your dealer can determine if the problem will require that the
computer be taken to a service center for repair. Before you call
your dealer, please have the following information available:
1. Which configuration of the Sahara Slate PC i500 do you have?
2. What is the serial number?
3. How is your computer set-up? What peripheral devices are
you using?
4. What error messages, if any, appear on the screen?
5. What software were you running at the time of the problem?
6. What have you done already to try to solve the problem? If
you have overlooked a troubleshootiong step, your dealer
may be able to solve the problem over the phone.
Solution
Make sure that the external device is
plugged into an electrical outlet.
Try connecting the external device to
another computer to determine if it
operates properly.
Disconnect the device, power it off, re-
connect the device and then turn it on.
Disconnect the device, power it off,
power it back on and then plug it back
into the computer.
Try the above two solutions, but plug
the device back in to the other USB
port.
Disconnect the device and power it off.
Shut off the Sahara Slate PC normally.
Power on the device and plug it in.
Power on the Sahara Slate PC.
Chapter 07: Troubleshooting 129